INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Published (Last):||15 October 2010|
|PDF File Size:||14.19 Mb|
|ePub File Size:||5.92 Mb|
|Price:||Free* [*Free Regsitration Required]|
Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates.
International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried. As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating.
These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Application by brush is recommended for small areas only. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.
Material is supplied in 2 containers as a unit. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. Consult your local International Paint representative for specific recommendations. Recommended Tip Range 0.
A two pack epoxy holding primer. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences intterline freshly mixed units. Thoroughly flush all equipment with International GTA Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. DO NOT thin more than allowed by local environmental legislation.
VOC values are typical and are provided for guidance purposes only. Always mix a complete unit in the proportions supplied.
Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition.
Interline | Litnobiles
Consult your International Paint representative for specific recommendations. Actual safety measures are dependant on application methods and work environment. 98 and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Consult your International Paint representative for the system best suited for the surfaces to be protected.
Clean all equipment immediately after use with International GTA Marine Coatings Marine chemicals Marine lubricants. Products Marine Coatings Marine chemicals Marine lubricants.
Use in accordance with the standard Worldwide Marine Specifications.
Application by roller is recommended for small areas only. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Intdrline of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays. All surfaces to be coated should be clean, dry and free from contamination.
Apply in good weather. Take precautions to avoid skin and eye contact inerline. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels.
Based on this, products supplied in different territories may not be approved to all of the standards listed above. The history and age of the steel and the method of working can have a significant effect on the paint consumption.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. Multiple coats may be required to achieve specified film thickness. Interline A two pack epoxy holding primer.
Consult your International Paint representative for details. Do not allow interlkne to remain in interrline, gun or spray equipment. Petersburg, Russia, phone: It is good working practice to periodically flush out spray equipment during the course of the working day. Do not exceed pot life limitations.
Use International GTA only in exceptional circumstances. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.